Application:
Selling Points:
Specification:
Length Adjustabe Range: Accommodates 0''-4'' of Vehicle Lift
Ride Height: 0"- 4" Lift
Item Weight ： 7.82kg
Package dimension : 991616cm
Material of the Joints: alloy
Rod thickness : φ35 Rod Length: 870mm
Warranty : one year for any manufacturing defect
Description:
Feature:
Installation instructions:
1. Remove stock track bar. Using an socket remove the passenger’s side
bolt
On the driver’s side mount you will need to remove the cotter pin. Then using
a wrench, loosen and remove the castle nut. Finally using a joint fork pry the
track bar away from the frame mount.
2. You should be able to remove the track bar now. Using a bristle brush,
clean out the inside of the driver’s side track bar mount. As well, clean the
lower face around the hole. Clean the outside frame rail where the retrofit
bracket will mount.
3. Align the support brackets and take the fork of the pan-har rod as a
reference. Be careful not to make the right or wrong direction. Install the
nuts one by one and tighten them.
4. Locate the existing hole just below the ground strap. Drill bit and
thru drill this hole to through the other side of the frame.
The drill hole must be level. Once through, deburr the exit hole. Mounting nut
5. Fix the brake line.
6. Adjust the track bar to a suitable length, and fix the nut.
Package Includes:
you will get what the picture shows
Note:
This is aftermarket replcement part. It can only be installed with a
bracket. The hole position of the bracket needs to be drilled separately.
Please feel free to contact us for whatever we can help via eBay message.
Instruction is not included. Professional installation is highly recommended.
FAQ:
1\. Q: What size hiem joints are in this kit? I would like purchase asap. Just
need to know what size hiem joints first.
A: φ 20mm
2\. Q: Does this traction bar have left and right threads, to adjust while
installed, and does it have locking nut sand all the proper hardware?
A: Unilateral adjustment.
3\. Q: Could you please let me know how long this track bar is? Minimum and
maximum length.
A: (The Center of Heim to The Center Heim) Minimum: 925mm Maximum:1025mm
4\. Q: How to install the bracket? instruction or even something that tells
the proper placement.
A: Replace the Ball joints placement of the OE Product.
5\. Q: Is this adjustable when mounted in place?
A: Recommended to adjust well before Installation.