Application
Compatible for Toyota Supra 2JZ 2JZ-GE/GTE Engine
Compatible for Toyota Altezza AS300/Compatible for Lexus IS300 1991-2004 3.0L
Compatible for Toyota Aristo/Compatible for Lexus GS300 1998-2005 3.0L
Compatible for Toyota Crown/Compatible for Toyota Crown Majesta S140 S150
1991-2004 3.0L
Compatible for Toyota Mark II X90 1992–1996 3.0L
Compatible for Toyota Mark II X100 1996–2000 3.0L
Compatible for Toyota Chaser X90; 1992–1996 3.0L
Compatible for Toyota Chaser X100; 1996–2001 3.0L
Compatible for Toyota Cresta X90 series 1992–1996 3.0L
Compatible for Toyota Progres Z30 series 1991–2000 3.0L
Compatible for Toyota Soarer / Compatible for Lexus SC300 Z30 1991-2000
Compatible for Toyota Supra A80 1993–2002 2,997 cc
Compatible for Toyota Aristo 3.0V JZS147 (Japan-only)
Compatible for Toyota Aristo V300 JZS161 (Japan-only)
Compatible for Toyota Supra RZ/Turbo JZA80
\--
Pin Type: Floating Pin Piston
Specification
Type: Forged 4340 aircraft chrome moly quality steel for racing
I-beam Conrods Quantity: 6 Pieces as showing in picture
Bolts: Including ARP 2000 3/8" bolts (Note: Extra cost for upgrading to ARP L19 bolts)
The connecting rods all include ARP 2000 bolts, which are rated at 220,000 psi, and the optional ARP L19 material at 260,000 psi is available as an upgraded product.
Advertised Horsepower Rating:200HP/piece
Top acceleration: 9000rpm
package size：28CM21CM14CM
Dimension
Center to center length:142mm/5.591"
Big end diameter:55mm/2.165"
Small end diameter:22mm/0.866"
Big end width:26mm/1.024"
Small end width:26mm/1.024"
Feature
1.TÜV PRODUCT TEST AND TÜV ISO 9001 CERTIFIED；
2.Material: Forged SAE 4340 Chrome Moly Steel for the highest strength and
durability, dedicated for Racing；
3.ARP 2000 bolts ,Optional ARP L19 fasteners available as an upgrade；
4.I-Beam reduce inertial force withstand the high gas pressure；
5.Heat-treating & Shot-peened for remained consistent and strong. Shot-peened
finish to remove potential for stress risers；
6.High precision CNC machined,Precision rod cap alignment dowels；
7.Bores finished to +/- .01 mm；
8.Balanced to within +/- 1 g per rod；
9\. Each rod is magnetic particle tested to ensure free of flaws；
10.Use X-rayed, sonic tested；
11.Custom Service.
Note
Professional installation is highly recommended ；
Custom Service:If there's no conrods you need on our site, we would be happy to help determine your requirements and develop a solution with you to satisfy your needs.