T7 Series LED Headlight Bulbs
Specifications:
Model: 9012(Low Beam) + H11(Fog Light)
Voltage: DC11~30V
Power: 160W/per pair
Lumen: 16000LM/per pair
Color Temperature: 6000K
LED Chips: High Power COB LED chips
Material: Heatsink aluminum shell
Fanless: yes, no noise
Lifespan: 50,000 hours
Waterproof Rate: IP65
Operating Temperature: -40℃~+90℃
Warranty: 5 years warranty
T7 LED Bulb All-in-One Conversion Kit
Super Bright: High power LED chips, 300% brighter as original halogen bulbs.
Noiseless: Without fans at the bottom of led bulbs, which provides you a quiet
driving environment and does not affecting the heat dissipation of the lights.
Easy to install: Simply Plug and Play
Smart Cooling System: Whole aviation aluminum body make sure the LED
conversion kits last longer.
Waterproof & Dustproof: IP68 water resistant and designed for use in heavy
rains, rainproof housing, can work even in extreme situations.
Foglight Specification:
Plug Type: H11/H9/H8
Voltage: DC10- 24V
Colour: 6000K/ White
Wattage: 100W
Surface Finish: Virtually Unbreakable PMMA Lens
Lifespan: >50, 000 hrs
Light Color: White
Package Included
2x 9012 LED Headlight Conversion Kits
2x H11/H9/H8 LED Foglight
5 Years Warranty
(Well Packaged in Retail Box)
LED headlight advantages:
1\. LED lamps are more energy and power than conventional halogen lamps.
The brightness is close to the xenon lamp, but the LED lights are illuminated
without delay to enhance road safety.
Instantly start without strong current impact, improve battery life by more
than 30%.
2\. Fast cooling , using the most advanced, heat-dissipating structural
design.
Low warranty:
The power driver adopts a wide voltage constant current mode which has a
simple structure, so that the automobile can flexibly cope with various
voltage unstable conditions, and has achieved the purpose of less component
damage. Compared to HID ballast maintenance, The repair probability is very
low which is less than 80%.
3\. Low heating temperature, The working temperature of helium can reach
800°-1000°
4\. LED headlight has a simple structure, and the parts are less than the
xenon lamp, which is lower than the xenon lamp failure rate!
5\. Car LED headlight color temperature are balancing. Xenon bulbs are clear
in the same color, about 6000K.
Install Caution
1\. As a safety precaution, make sure that the car has had time to cool down
properly before starting the installation process.
2\. Put the vehicle into park or make sure it is securely in gear.
3\. Be sure to turn off the ignition and remove the key.
4\. Be careful to avoid burns, especially when turning on or off the vehicles
lighting.
5\. Be careful to avoid crushing or cutting the bulbs. Also make sure to not
touch the bulbs with your fingers, as this will cause blotting.
6\. Fully examine the connection of the contact points, ports and the wires as
faulty connections can cause lighting problems.
7\. Make certain that the end of the bulb does not come in contact with the
interior light shield of the headlight when adjusting the bulb.