Introduction
MXR-SLC based on MXR-SNA coilovers, which is also height adjustable but adds
damping adjustment ability by a knob the top of the shaft. They are also made
for street use, but the 24 level rebound damping control allows you the
ability to perfectly dial in your coilover setup. You will experience better
ride quality in all road conditions.
Application
Compatible for Chevrolet Cobalt Base/LS/LT/LTZ/Sport/SS 2005-2010
Specification
Top mounts: Pillow ball top mount with camber plate
Adjustable camber plate: Only front
Damping: 24 levels rebound damping adjustable
Spring rate Front: 7 kg/mm (392 lbs/in)
Spring rate Rear: 7 kg/mm (392 lbs/in)
Spring length Front: 200mm
Spring length Rear: 160mm
Adjustable height: lowering 1-3 inch
Coilover overall length Front: 345mm-465mm
Coilover overall length Rear: 385mm-420mm
Shock type: Twin tube
Spring preload: 7-10 mm
Color: Golden
Package included
product included: 2 piece front + 2 pieces rear + 2 sway bar end links + 2
spanners + hardwares as pictures show
Dimension
Size: 635121 cm
Weight: 24.38 kg
Feature
Lowered height adjustment from 1" - 3" which allow lower center of gravity and
also add a more aggressive stance.
A 24 rebound dampening adjustment level allows you the ability to perfectly
dial in your coilover setup. You will experience better ride quality in all
road conditions.
Twin-Tube structure allows sufficient stroke within the shock absorber.
Complete Suspension Kit of 4 Shock Absorbers & 4 Springs for an easy
installation.
Separate height adjustment does not affect damper stroke.
Height can be adjusted with coilovers installed on the vehicle.
High Tensile performance spring - STRESS TESTED OVER 600,000 times while the
spring distortion is less than 0.04%. Plus the special surface treatment
improves the durability and performance.
Height Adjustment tools included.
Camber plate top mounts help to eliminate the need for a separate camber kit.
Pillow ball top mount - It improves the steering feel and response.
Most pieces in our Coilover systems, including mounts, collars and spring
perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight,
durable and rust resistant components.
Full rebuildable.