Product Specifics
Manufacturer Part Number: E11407501CP
Type: Mass Airflow Sensor (MAF Sensor)
Air & Fuel Sensor Type: MASS AIR FLOW Sensor/Meter
Warranty: 1 Year
Interchange Part Number: 078906461B, 078906461BX
Reference Part Number: 280218038, 280218039, 280218212
Other Part Number: SU5412, 28021808
UPC: Does not apply
Fitment Type: Direct Replacement
Placement on Vehicle: Front
Housing: w/ housing
Pin Number: 5 pins
Item Color: Black
With Housing: Yes
Condition: 100% Brand New Mass Air Flow Sensor
Replacement: Directly Plug-in Replacement
Material: Plastic
Color: As picture showed
Note: Our mass air flow sensor is the same with the pic showed in the page
How to replace the MASS AIR FLOW SENSOR(MAF)
1. Position MAF sensor in the vehicle. Make sure the airflow direction indicated on the sensor is toward the engine.
2. Install sensor to air duct seal(s), if so equipped, on the replacement MAF sensor.
3. Connect the MAF sensor to the throttle body air cleaner ducts. If the sensor mounts directly on the throttle body, install and tighten the mounting screws to 10 ft-lb. DO NOT OVERTIGHTEN!
4. Position clamps over the air duct/MAF sensor connections and tighten. Replace the clamps if necessary. (NOTE: For the MAF sensor to work properly, the sensor/air duct connections must be airtight.)
5. CAREFULLY plug the harness connector lead into the MAF sensor.
FAQ about the MASS AIR FLOW (MAF) SENSOR
FAQ1: WHAT does a MAF Sensor do?
The Mass Air Flow (MAF) sensor measures the amount of air flow entering the intake manifold using a heated grid or wire. The PCM uses this signal primarily for fuel control.
FAQ2: WHERE are these sensors located?
The Mass Air Flow sensor is located in the intake ducting after the air filter.
Includes
1pcs of brand new Mass Air Flow Sensor/Meter (MAF)
Contact us
Any question or problem, please contact us.