100% brand new, Never used or installed.
Great Tool Set Timing Pin and Adapater- Make timing easier,acquire TDC and begin valve and fuel injection timing procedures; 9U7227Injector Height Tool-Accurately adjust the Injector Height of the engine;Engine Barring Socket--Turn over engine, makes adjusting injectors and valvelash easierIt was able to pin flywheel
Constructed with high quality carbon steel, which is the bestquality of those markets in sale, with great strength and durability for yearsof trouble-free use.
Professional installation in highly recommended.
No instruction included.
J-42083 Timing Pin andAdapter
Works on Caterpillar C-7, C-9, C-11,C-13, C-15, C-16, 3179, 3196, 3200, 3300 and 3400.
USE INSRUCTION
1. Remove the plug from either the left or right side timing accessholes.
2. To install, hand tighten the J42083 Automatic Timing Pin Lock intothe timing access hole.
3. Preload the spring on the automatic timing lock by pushing the slidehandle forward and turn it clockwise to engage either of the two locking slots.
4. Manually, turn engine in direction of rotation(usually counterclockwise refer to Caterpillar Service Manual)until a notice “click” sound isheard.
5.The automatic timing pin plunger has now engaged the flywheel timingholes in either the top center compression or exhaust stroke.
6. To remove, turn slide handle counter clockwise to release springtension on the plunger (if plunger doesn't retract from flywheel with lightpressure, jog the flywheel back and forth). Unscrew from flywheel housing.
J-38587-A EngineBarring Socket
Works on Caterpillar(CAT) engines3200/3406 series C13/C15/C16/3208/3400/3406e/3508/3512/3500 EUI/MUI engines, Mack E7/E-7ETEC Engine etc.
USE INSRUCTION
1. Insert the tool into the flywheel housing until it engages the ringgear
2. Then attach a 1/2-Inch square drive ratchet or breaker bar and turn.
9u-7227 Injector Height Tool
Works on Caterpillar 3406E, C-15 andC-16
USE INSRUCTION
1. When you finish the valve adjustments tothe injector height, you can use the tool to accurately adjust the injectorheight to 78.0 ± 0.2 mm (3.07 ± 0.01 inch).
TIP: The dimension is measured from the topof the unit injector to the machined ledge of the fuel injector body.
2. Tighten lock-nut to a torque of 100 ± 10N·m (74 ± 7 lb ft)
Fitment:
Three are used on Catetpillar C-15,C-16.But each can be used on many other models of CAT.
TheEngine Barring Socket is Similar to #J-38587-A, and the Automatic Engine TimingPin is alternative to J-42083, 139-7064 (adapter for C11), 220-2793, 136-4632.( C-11 and C-13 require adapters 139-7063 or 139-7064 depending on theapplication.) Alternative to 9U-7227, properly maintain the CaterpillarInjector height.
For Exact Years and Models, Please Check Compatibilities
Package including:
1 Automatic Timing Pin
1 X Engine Barring Socket
1 X Injector Height Adjustment Tool-Red