Notes:
1.Please check whether it is fit your vehicle before purchase.
2.If your shipping address is not to US, we will ship from CN stock, items
will be shipped from our warehouse in South China.
Compatible With: H13 / 9008
Headlight Spesification:
Plug Type: H13/9008,Hi/Low Beam
Power(per set): 120W/Set,60W/bulb
LED Quantity(each bulb): 2pcs Bridgelux COB chips
Luminous Flux: 28000lm/set(14000lm/bulb)
Operating Voltage: DC 9-32V(fit 12V,24V vehicles)
Color Temperature: Golden Yellow 3000K
IP68 rated water and dust seal,over 30000hrs lifetime
Beam Angle: 270 degree@low beam,360 degree@high beam
Material: Aviation 6063 aluminum profile
Operating Temperature: -40-80 degree Celsius
Usage: headlight
(2pcs/set)H13/9008 Bridgelux COB Single Beam LED headlight conversion kit
Latest Bridgelux COB chip (USA) light source,270/360 degree no blind zone
Engineering beam pattern design throw more light on road evenly at appropriate
angle without foggy light
Xenon white light reflect road paint/signs better to show clearer road
situation during night driving
270 degree low beam angle with cut-off line,will not dazzle oncoming traffic
All-in-one heat conduction+high speed mute fan system keep the light bulb in
appropriate working temperature
Built-in constant current CPU, instant full brightness without start-up relay
Two-way heat dissipation channel
1.All-in-one aluminum profile as heat conduction system, 360 degree heat
radiating
2.High speed mute fan (12000R/Min),high Air flow for faster cooling rate
Package Included:
2x H13/9008 LED headlight bulbs
5 Years Warranty
Well Packaged in Retail Box
Install Caution
1\. As a safety precaution, make sure that the car has had time to cool down
properly before starting the installation process.
2\. Put the vehicle into park or make sure it is securely in gear.
3\. Make sure to have the ignition turned off and the keys removed.
4\. Be careful to avoid burns, especially when turning on or off the vehicles
lighting.
5\. Be careful to avoid crushing or cutting the bulbs. Also make sure to not
touch the bulbs with your fingers, as this will cause blotting.
6\. Fully examine the connection of the contact points, ports and the wires as
faulty connections can cause lighting problems.
7\. Make certain that the end of the bulb does not come in contact with the
interior light shield of the headlight when adjusting the bulb.
NOTE: Please contact us first before you leave a negative feedback, we will
try our best to solve problem for you. Thanks.